HERTZ by Elettromedia

Share this page:

CPK 690

System

The latest addition to the Cento PRO line is the CPK 690 system equipped with an elliptical woofer to avail of the 6 x 9 door placements, which are particularly common in the North American market, such as for the models of Toyota and FORD groups.

Like the other speakers of the Cento PRO line, the woofer cone is made of pressed paper, the most suitable material to obtain a linear and controlled emission even when the woofer is driven with very high power.

All electroacoustic parameters have been optimized to obtain maximum performance with door installations; we therefore find a magnetic group and voice coil improved for an excellent power handling and a lower resonance frequency.

The large emission area of the CP 690 increases the woofer efficiency and extends the response down to 35 Hz. 

The crossover made with selected components, features a low-pass filter on the woofer with a 6 dB/oct. slope and

12 dB/oct. on the tweeter with three levels of attenuation.

CPK 690 is dedicated to the young enthusiast who wants a front row seat at their favourite concert while sitting comfortably behind the steering wheel.

read more

Data table

Power Handling - Peak W 360
Power Handling - Continuous W 120
Impedance 4
Frequency response Hz 35 ÷ 22,5k
Sensitivity dB SPL 92
Voice coil Ø mm (in.) 30,5 (1.2)
Woofer size mm (in.) 6 x 9
Tweeter size mm (in.) 29 (1.14)
Woofer magnet Ferrite
Tweeter magnet Neodymium
Woofer cone Pressed Paper
Tweeter dome Tetolon
Crossover type 2 Way
Crossover cut off LP 6 dB / Oct. - HP 12 dB / Oct.

Share this page:

Scroll to top